Protective Vinyl Wrap For Shocker Air Bumper Hitch

Install

• Clean surface with mild soap and water to remove any dirt, grease, or grime.
• Rinse surface well with clean water to ensure no soap residue is left over.
• Dry with a lint-free or micro fiver (for best results).
• Wipe down surface with isopropyl alcohol and wipe down where vinyl wrap will be applied. Let completely dry.
• Pull vinyl wrap from backing paper and carefully apply wrap starting from the top and working downward, it is recommended to do this on a table with hitch laying on side.
• Be sure that the pin holes, pivot pin, and air valve holes line up evenly. Once lined up and material has made contact, firmly press vinyl wrap onto surface to adhere.
• Work out any air bubbles by firmly sliding outward. For best results, use a heat gun and lightly heat surface to help set the adhesive and/or wait 24 hours.