Product Description
- Weld-on Square Outer tube stem sleeve for gooseneck couplers.
- Commonly used by Gooseneck trailer manufactures.
- Thick wall steel that is fabricated from formed 1/4″ ASTM A572 GR50 made steel plate.
- Reinforce heavy-duty collar at lower neck for additional strength.
- Precision tolerance to fit existing inner tube square gooseneck couplers.
- 20″ Height.
- Raw Steel Finish. Made in the USA.
- Increased security with two 3/4″ set bolts with jams nuts. Gooseneck 3/4″ diameter through pin & clip included with 4.5″ OD / 4″ ID & 1″ diameter through pin & clip included with 5″ OD / 4.5″ ID. Top crank & diamond c style does not have through pin.
- Can be welded on to gooseneck trailer with set bolts in the front or the back.
- Top sleeve is capped to prevent water and debris accumulation.
- 40,000 lbs GTW. Professional welding required.
- 3 Styles to Choose From: 4.5″ OD Sleeve to fit 4″ Square Gooseneck coupler with straight pinhole, 4.5″ OD Sleeve to fit 4″ Square Gooseneck coupler with Top Crank or 5″ OD to fit 4.5″ Square Gooseneck coupler with straight pin hole.
- Looking for a gooseneck coupler? Check out our Shocker Gooseneck Couplers.
The weld on thick wall outer tube square stem neck for a gooseneck coupler is available in 4″ and pin hole, 4.5″ with pin hole or 4″ for a top crank. It is rated up to 40,000 lbs of gooseneck towing capacity. This is a Heavy Duty neck that gooseneck trailer manufacturers often use. It comes in raw steel and the sleeve tube is designed to be welded onto the front of a gooseneck trailer. Lower collar offers additional strength. These square outer gooseneck coupler sleeves are fabricated from thick walled formed 1/4″ steel, precision tolerance. Dual set bolts offer additional strength and secured. Available and designed to fit existing 4″ or 4.5″ gooseneck couplers with square inner tube stems. Top sleeve is capped to prevent water and debris accumulation. Can we welded onto gooseneck trailer with set bolts in the front or the back. They are 20″ in height and include 3/4″ set screws and jam nuts. Does not include inner tube gooseneck coupler. Professional welding required for weld on square tube for gooseneck tongue. Manufactured by Shocker Hitch USA.
Looking for a gooseneck hitch & coupler? Check out our Shocker Gooseneck Hitches & Couplers.
Service a people I spoke to on the phone were the best I have delt with in years!
All in all pretty haply!